APG offers copper (Cu) sputtering targets in planar, rotary and custom shapes. Purity ranges from 99.9% (3N) to 99.9999% (6N). For a quote, send your required purity, target dimensions, quantity and any bonding requirements.
Copper Sputtering Target Specifications
Material Properties and Manufacturing
Purity and impurity control. The required copper grade depends on the film and deposition process. For applications with strict composition requirements, specify the minimum purity and limits for individual impurities such as oxygen, sulfur and iron. Include any required material analysis or inspection documentation in your inquiry.
Grain size and microstructure. Grain size and crystallographic texture can affect how a copper target erodes during sputtering. If your process specifies a grain size range, texture or microstructure inspection, provide the acceptance criteria so APG can review the requirement for the selected grade and format.
Electrical and thermal conductivity. Copper's electrical conductivity makes it suitable for depositing conductive films. Its thermal conductivity helps transfer heat through the target during deposition. Target cooling also depends on geometry, backing plate design, bonding and operating conditions.
Target geometry and equipment fit. For a planar target, provide the diameter or the length and width, together with the thickness. For a rotary target, provide the inner diameter, outer diameter and length. If your drawing calls for a dimensional tolerance of ±0.1 mm or a surface roughness of Ra ≤0.8 μm, include those values so APG can confirm whether they can be met for the requested geometry. Provide the cathode model or a mounting drawing when equipment fit is critical.
Applications of Copper Sputtering Targets
Request a Copper Sputtering Target Quote
Send your required purity grade, target format, dimensions and quantity. Include the coating application, any oxygen or other impurity limits, and your backing plate or bonding requirements. Attach a drawing or provide the cathode model if the target must fit an existing assembly. Let APG know if your order requires a material analysis report or dimensional inspection.